Cafco FENDOLITE® MII

Integrated Fire Protective Coating System

Cafco FENDOLITE® MII is a spray applied, single package factory controlled premix, based on vermiculite and Portland cement.

Cafco FENDOLITE® MII produces a monolithic coating able to withstand the thermal shocks experienced in a high intensity hydrocarbon fire. Concrete structures in particular, will be protected from explosive spalling when coated with Cafco FENDOLITE® MII.

Although low in density, thus significantly reducing dead load, Cafco FENDOLITE® MII is highly durable and will not crack or spall under mechanical impact.

Cafco FENDOLITE® MII does not release toxic or hazardous fumes, and presents no known health hazards either before, during or after application. The surface may either be spray textured, roller or float finished.

Cafco FENDOLITE® MII is used for application on construction elements such as individual steel or concrete sections particularly where off-site application is required.

Product Datasheet Download Download

Cafco FENDOLITE® TG

Integrated Fire Protective Coating System

Cafco FENDOLITE® TG is a trowel applied, factory controlled premix based on vermiculite and Portland cement. It is used with potable water to be added on site.

Cafco FENDOLITE® TG will not fail suddenly after the prescribed fire resistance period but will continue to offer a predictable level of fire protection (insulation) for the duration of the fire.

Cafco FENDOLITE® TG is ideal for application by trowel in interior and fully exposed environments.

Product Datasheet Download Download

Cafco SPRAYFILM® WB3

Structural Steel Column & Beam Coating for Building & Construction Industries

Cafco SPRAYFILM® WB3 is a water-based intumescent coating consisting of polyvinyl acetate resins and fillers for the fire protection of structural steel. It can be sealed and protected with a decorative top coat.

Cafco SPRAYFILM® WB3 is applied directly to the contour of primed I and H section columns, angles, channels and beams and hollow sections, to provide fire protection for up to 120 minutes. In a fire, a chemical reaction takes place causing the Cafco SPRAYFILM® WB3 to expand and form an insulating layer which slows the temperature of the steel rising to a critical level.

Product Datasheet Download Download

Cafco MANDOLITE® CP2

Vermiculite & Portland Cement Based Wet Mix Spray

Cafco MANDOLITE® CP2 is a spray applied, single package factory controlled premix, based on vermiculite and Portland cement, for internal use.

Cafco MANDOLITE® CP2 produces a monolithic coating able to withstand the thermal shocks experienced in a high intensity cellulosic fires. Concrete structures in particular, will be protected from explosive spalling when coated with Cafco MANDOLITE® CP2.

Although low in density, thus significantly reducing dead load, Cafco MANDOLITE® CP2 is highly durable and will not crack or spall under mechanical impact.

Cafco MANDOLITE® CP2 may be applied within environments where limited exposure to the elements is likely throughout the building phase of the project, e.g. perimeter beams.

Cafco MANDOLITE® CP2 is used for application to steel and concrete frames, metal floor or roof decks, and return air plenums. It may be easily removed and reinstated locally when additional fixings are required. Building types that will benefit from the use of Cafco MANDOLITE® CP2 include a wide range of educational, leisure and entertainment centres, commercial or industrial projects.

Product Datasheet Download Download